Batting Practice For Little League Teams
By Guest Author: Marty Schupak
In my eighteen years of coaching youth baseball, I am always looking for the most efficient practice methods for every aspect of baseball. It took me only a few years to realize that most youth baseball coaches and myself were running batting practice, not incorrectly, but not efficiently. From what I have seen with the typical batting practice, a coach will pitch a predetermined number of balls for each batter with the fielders fielding the hit balls and throwing them to first base. Usually the coach will yell something like "run the last one out", and the batter does just that. If the ball is an infield hit, they try to throw him out at first. If it is hit into the outfield, he usually runs until he is thrown out. This is all well and good intentioned, but it is wasting valuable time when a coach wants to run an efficient practice.
Here is the most efficient way of running a batting practice that I've come up with. First of all, let me say this. Batting practice is just what it is, batting practice. Batting practice is not fielding practice or base running practice. So all youth coaches and parents should really define what a youth batting practice is and what they want to get out of it.
Most of my youth practices do not run more than one hour. Every minute of wasted time will affect all other aspects and time of any other drills or techniques I want to accomplish. The first thing a coach needs to have is an over abundance of baseballs. The league will provide baseballs but I always make sure I purchase a few dozen extras. I try to work with three-dozen and keep an extra dozen in my trunk. And don't think I'm not frugal accounting for every baseball at the end of practice. I try to make sure we find each one, and after practice, we comb the field to make sure we got them all. Usually we find extras and end up with more than what we started with.
Now, here is the actual logistics and set up that I do about 95% of the time I run batting practice. I'm a big proponent of bunting. I set up two cones on the third base line, about six feet apart, approximately where the bunt is suppose to go. I set up two empty buckets, one about three feet behind second base and the other one at the far base of the mound toward second. I have another bucket with the baseballs on the mound easily accessible to me. Now, this is a key. As a youth coach who wants a well-run practice and a lot of repetitions for the kids, I move up almost to the front base of the mound to pitch. I do this mainly so I can throw strikes consistently. For safety purposes, an "L" screen would be required from a shorter distance for safety. If your league doesn't have any, make them get them.
I have the first person up at bat with the 2nd and 3rd player ready to go. I have the 3rd hitter (or double on deck hitter) on the outside of the screen hitting balls on a batting tee using pickle balls (plastic) or wiffle balls with another parent feeding the balls on the tee. I always have the number 2, or on deck hitter, ready to hit.
The batter bunts the first to pitches. For each successful bunt, the player receives an extra swing. I usually give a player five swings besides his two bunts. So if a player lays one bunt between the cones, he get six regular swings. If he lays both bunts between the cones, he gets seven swings (the maximum per hitter). Now, there are certain things that have to happen to make this work. Remember there are two buckets strategically located. After the bunts, when the hitter swings away, wherever the ball is hit, the fielder tosses it into the bucket closet to him. If it is hit to the outfield, he will throw the ball as close to the bucket behind second base. If he hits it to the infield, the fielder will toss it to the bucket behind the pitcher's mound. Reinforce to the players that they must toss to the bucket on one or two bounces or they will tend to play basketball with the baseball and bucket.
Now the point here is that the fielders do not make a play to first and the hitter does not run the last one out. We get more repetitions in a short period of time. The players are always facing the hitter. One might ask, isn't this boring for most of the players in the field? Well, not really. Because of the amount of balls hit in a short period of time, the ball is usually hit all over the place. And the coach throwing batting practice will keep one or two extra balls in his glove and is ready to pitch the next ball right away. When out of baseballs, have the players in the infield hustle to gather up the balls, combine buckets, and we're ready to go again. This works great!
Batting practice is a favorite of any baseball player at almost every level. Do not deny batting practice at any practice. And always look for the most efficient, safest procedure to help enhance your whole practice.
Marty Schupak has coached youth baseball for 18 years and is the video creator of "The 59 Minute Baseball Practice", "Backyard Baseball Drills", "Winning Baseball Strategies", "Hitting Drills & Techniques" and author of the popular book, "Youth Baseball Drills". He is a principle for Videos For Coaches and is also President of the Youth Sports Club, a group dedicated to making sports practices and games more enjoyable for kids.
Article Source: http://EzineArticles.com/?expert=Marty_Schupak
Welcome to the BatAction Baseball Training Blog
The BatAction Blog presents baseball batting training tips, baseball hitting drills, and other information to help Bat Action owners produce unbelievable results from working out on the BatAction Baseball Trainer. Baseball coaches, players and parents will find this information very interesting and extremely useful. The Regular posts include new and innovative training drills and techniques to increase bat speed, improve power, improve hitting skill, and increase batter confidence.