How to Demonstrate Batspeed in a Baseball Recruiting Video

By Mike Liberatore

When you are making a recruiting video for college baseball coaches, the most important thing a player can do is to show their tools. This means, how can you show a coach your ability to hit for average, hit for power, run, throw, and play defense? Some of this is difficult to convey when a coach is watching you on video in a workout format as opposed to in-person at a game. Today, we will look at how to incorporate your batspeed in a recruiting video, and why.

First of all, it is important to realize that many coaches and scouts value batspeed for a hitter in the same way they view velocity for a pitcher. It is that important. As it is with pitchers, velocity is not the only indicator of success or ability, but it shows the coach that a player has the necessary tools to develop their talent. The reason a coach wants to see a players batspeed readings is that it is a good indicator of a player's ability to hit for power (one of your 5 tools) at the next level. Again, this would be similar to a pitcher with higher velocity being likely to have a higher strikeout rate. Players love to send coaches their stats or newspaper clippings, especially those regarding home runs, but if that player comes to a tryout and swings a bat 75mph, their likelihood of being a power hitter in college are very low. It does not mean that the player will not develop into a good hitter, but that they more likely project to a top or bottom of the lineup player as opposed to the middle of the order. Interestingly, batspeed and pitching velocity seems to correlate fairly closely. The majority of high schoolers will swing a bat in the high 70's to low 80's. The majority of college players will reside in the mid to high 80's and the elite players will swing in the 90's and sometimes over 100mph. Batspeed of over 100mph is much more common than pitching velocity in that range, which is basically exclusive to the major league level.

There are a few easy ways to illustrate your batspeed for a college coach, and you really don't need a ton of high tech equipment. You will need a wood bat, a ball, a digital video camera, a radar gun, and maybe a tee if you choose to use one. Most high school coaches have a radar gun that a player could borrow, and worst case scenario one could be rented. In order to get the actual batspeed (as opposed to the exit velocity of the ball), you will want to kneel behind the hitter and point the radar gun at them. Assume the position of the catcher. The camera should be pointed at the player with the radar gun in the frame. If necessary, you can zoom in on the reading after each swing. The player can then hit soft toss or off of a tee. You should attempt to hit low line drives straight back through the back of the batting cage. This will also teach a hitter good mechanics, as they will quickly find that a longer swing will typically have lower batspeed. Remember, it is important to get the reading from behind the player as opposed to off to the side or from a pitchers view. Having the radar gun in those locations will measure "exit velocity", which is different from batspeed. Exit velocity measures how fast the ball travels off of the bat, as opposed to how fast the player swings the bat. Generating great exit velocity is a huge plus, but it will be easier to demonstrate batspeed since exit velocity can sometimes be dependent on the velocity of the incoming pitch.

Please check back for our upcoming articles on demonstrating the other four tools in video format, how to properly edit the video, and how to ensure it is viewed by college baseball coaches.

Mike Liberatore is a former college baseball player, AAU baseball coach, and owner/operator of http://www.baseballrecruitsonline.com

Article Source: http://EzineArticles.com/?expert=Mike_Liberatore

The 10 "Must Do's" Of Coaching Baseball And Softball

I have compiled my list of the "MUST DO'S", that I feel every coach must coach by! These reflect the duties and responsibilities accepted when one becomes a coach. Here are my "MUST DO'S":

1. I MUST..."Always remember that I am a role model, on and off the field, for all players and kids. I must remember that everything I do is observed. Everything I say is heard.

2. I MUST..."Always remember that something I say or something I do not say can have an profound positive and negative affect on a player. I am a coach because I care! I care about the game. I care about my players. I must act like I want to be there! My player will observe and emulate my attitude. My attitude must show my dedication, excitement, and enthusiasm!

3. I MUST..."Constantly remember that the safety and well-being of my players is my responsibility and the old saying, "An ounce of prevention is worth a pound of cure", is never truer than when it applies to sports accidents. Youth coaches should apply a team rule that that at practice no player should swing a bat, unless the coach has given them permission to do so.

4. I MUST..."Be fair to every player. I will treat every player equally with the same respect. I will always be honest with my players. I will be mindful that praise is a great motivator. I will at times use constructive criticism but I will always maintain a balance between correction and praise. I will speak "one-on-one" with every player, every day. This may be something as simple as the question, "Jon, how is your day going?".

5. I MUST..."Demand and receive respect from every player at all times. Disrespect will not be tolerated. I will remember discipline is a vital part of the game. Team and self-discipline is something I must teach and reinforce. Kids expect and love discipline. Many players do not get enough discipline at home."

6. I MUST..."Dress and look the part of a coach. I will keep a clean and neat appearance at all team practices and games."

7. I MUST..."Remember that to be a good coach, I must first be a good teacher. It is my responsibility to teach the fundamentals, rules and skills of the game. I will structure and organize every practice and pre-game ritual so that my players will know what to do, will know what to expect, will be focused and stay busy." I must remember "idle" time is "trouble" time when one is dealing with kids. I will always be the first to arrive and the last to leave all games, practices, meetings, and all other team events!"

8. I MUST..."Coach the details during the game to help my players learn and perform to their highest level". I will work hard at all times during practice and games. I will instill in my players the value of hard work and preparation.

9. I MUST..."Remember that character development and self-confidence are what youth sports is all about. Kids do not have to play. They play because they want to have fun! I must have fun, know how to laugh, and enjoy every minute along with my kids!"

10. I MUST..."Remember, that "WINNING is NOT EVERYTHING" but "EXPECTING to WIN" is. I must instill hope and confidence as I prepare my team for each game!

The CoachesBest Baseball Store has a great selection of BASEBALL COACHING DVDs. Check out the BatAction Hitting Machine baseball pitching simulator. This high speed training machine is 100% Guaranteed to raise Batting Averages and has a full year warranty.

Nick Dixon is the President and founder of Nedco Sports, the "Hit2win Company". Dixon is also an active and full time high school baseball coach with over 25 years experience. Dixon is widely recognized as an expert in the area of baseball training, practice and skill development. Coach Dixon is better known as the inventor of several of baseball and softball's most popular training products such as the Original BatAction Hitting Machine, SKLZ Derek Jeter Hurricane Hitting Machine, Original Hitting Stick, Hit2win Trainer, SKLZ Target Trainer, SKLZ Derek Jeter ZipnHit Pro, and Strikeback Trainer. Dixon is also a contributing writer for BaseballCoachingDigest, the Baseball 2Day Coaches Journal, Batting Cage Builder, the American Baseball Directory and the Hit2win Baseball Coaches Monthly Newsletter. Dixon has 5 blogs related to baseball training including the BaseballCoachingDigest Blog, CoachesBest Training Blog, Hurricane Machine Training Blog, Batting Cage Buyers Blog, and the Bat Action Training Blog.

Article Source: http://EzineArticles.com/?expert=Nick_Dixon

Buy a new BatAction Machine or BatAction Machine Replacement Parts at CoachesBest.com.

BatAction Machine Replacement Parts are Available at CoachesBest.com

I sometimes have inquiries from coaches and parents looking for a replacement part for their BatAction or Hurricane Hitting Machine. You can purchase replacement "impact head ball units", "powerbands", and other BatAction Machine and Hurricane Machine Parts at Coachesbest.com.

Click Here for BatAction Machine Parts.
Click Here for Hurricane Machine Parts.

BatAction Hitting Machine Drills: Top Hand and Power Hand Drills

Drill # 1
Top-Hand Drill
The top hand on the grip is the hand that takes the bat to the ball. It is improtant to develop strength and skill with this hand. To do this we do a one-handed isolation drill. The batter uses just the top hand. Gripping the bat at the top of the grip and using the bat like a tomahawk, the batter tries to get over the top of the ball and hit it into the ground. The batter has a coach or player soft toss the ball above the waist. The batter hits the ball from the top and drives its straight into the ground. This drill is best performed with the Hit2win Handheld Trainer from Nedco Sports. Suggested - 25 Swings - 3 Times a week.

Drill # 2
Power Hand Drill
A hitters power comes from the bottom or pull hand. This drill develops bottom hand strength. This drill when done on a hitting machine, the machine should be set at a high strike setting. The hitter uses only the bottom hand in its regular position near the knob of the bat. We recommend the BatAction Hitting Machine for this drill. It works absolutely perfect! The coach must make sure that the ball is above the batters waist. It is best for the ball to be numbers high. The batter steps into the ball and hits its one-handed. Suggested - 25 Swings - 3 Times a week.

New BatAction Hitting Machines and parts are available at Coachesbest.com.

"Pitch Tracking"

By Nick Dixon

"Pitch Tracking"

Great Drill for Hitters, Catchers, and Pitchers!

The pitcher is throwing to a catcher as he normally would in pitching practice or bull-pen work. The pitcher is throwing at his normal pitching distance. The purpose of the drill is to increase a pitcher's level of concentration, to work a catcher, and to allow one batter or two batters learn to "track" every pitch.

Variation #1: One Batter - Right or Left handed
C ---------------- P
B

Variation #2: Two Batters - One Right and One Left handed
B
C ------------------------- P
B

Variation #1 - One batter is standing in and tracking every pitch from the pitcher's hand to the catcher's mitt. The batter does not have a bat. The batter will assume his regular stance and imagine that he is holding a bat. The batter will "track" or watch the first three pitches out of the pitcher's hand until they hit the catcher's mitt, making sure to keep his head down and eyes on the ball all of the way. The batter must have a batting helmet on. The next steps to the drill are explained in the second paragraph below.

Variation #2 - Two batters are standing in the batter's box without bats. Each batter will assume his regular stance and imagine that he is holding a bat. The batters will "track" or watch the first three pitches out of the pitcher's hand until they hit the catcher's mitt, making sure to keep his head down and his eyes on the ball all of the way. The batters must have a batting helmet on. The next steps to the drill are explained in the paragraph below.

Next the batters will swing away with their "imaginary" bats. The batters will read the location of each pitch the pitcher throws and hit the ball where it is pitched. When two batters are tracking, they will do opposites. One will pull a pitch in a location that his tracking partner will hit to the opposite field.

The coach can call out a count such as 2-0, 3-1, 1-2, and 0-2 to allow the batters, pitchers, and catchers certain mind-sets in different situations.

Note: If your hitters are too young to perform this drill, have a coach to stand in. The coach may wish to wear a helmet and wear a glove for protection. This is a tough drill, but it is great for developing concentration. Make sure all batters wear helmets and other proper protective equipment.

Coaching Point: The hitters do not hold a bat. The batters will swing a "invisible" bat. They must attack and hit every pitch according to its location. This drill is great for teaching hitters to see spin and to teach them to see a pitchers release point.

Coaching Baseball Batters - 3 Common Baseball Swing Mistakes and Corrections

By Nick Dixon

Coaching youth and high school baseball batters requires a watchful eye and close attention to detail. Baseball coaches must identify and correct any flaw in batting hitting mechanics. Players should not be allowed to practice their swing over and over without correcting their mistakes. Good baseball coaches are always on the constant lookout for any bad habits that a young player may develop. Here I discuss three of the most common hitting mechanical flaws and my approach to correcting each. Here are three common mistakes I often see at my baseball camps and when I observe youth games and youth practices.

1) BARRING THE FRONT ARM - The batter locks or stiffens the front arm as the swing begins. Many young batters will have assumed the correct stance and launch positions but have a tendency to tighten up as the swing begins. The barring of the front arm causes the swing to loop and to be too long. The batter has great difficulty taking the bat to the ball and making contact unless the ball is thrown exactly on the swing plane. The proper swing has a "short stroke" or path to the ball. The best way to correct barring of the front arm is to make sure that the batter keeps the front arm elbow bent or at an "L" position prior and during the swing.

2) STEPPING OUT OR PULLING OFF PITCHES - I often see this with young kids in our summer camp program. They always step out or their front side often flies open before the ball arrives. This batter has great difficulty making contact. Until this flaw is corrected, the batter will only become frustrated and embarrassed. To keep the front shoulder in the proper "closed" position, teach the batter to keep the front shoulder closed and directed at the second baseman for right-handed batters and toward the shortstop for left-handed batters. The stepping out is a more difficult flaw to fix. Having the batter pick the front heel off the ground and stepping just slightly toward the plate may help. I frown on putting obstructions behind the front foot to keep it from moving backward, although many coaches do this to stop this bad habit. I often use the "step in and hit: drill with a hit trainer, Bat Action Machine or batting tee. The batter assumes a position back away from the ball target that requires the batter to step toward the ball in order to make contact. If the batter does not step toward or into the ball, the batter will not be able to hit the ball.

3) UPPER CUT SWING - The upper cut swing may be caused by two things that are quickly identified Dropping the hands and back leg collapse can both cause the batter to swing upward. Make sure that the batter keeps the hands at the top of the strike zone and does not drop the hands or dip the back side shoulder during the swing. The back leg should be keep "tall or straight" to prevent back side dipping which can also cause an upper-cut swing. Two great drills that we use to stop this is the "Zone Circle" tee or soft-toss drill. We make a circle the side of our batting cage by inter-weaving a white or yellow rope in the net. The batter must hit or drive the ball off the tee or from a soft-toss into the circle. The batter must have a level swing and keep the front side in to be able to hit the zone.

COACHING POINT: Make sure that the batter is not over striding. This too can cause a batter to pop up. The batter must concentrate visually on the top half or middle of the ball to make good contact.

The CoachesBest Baseball Store has a great selection of BASEBALL HITTING, COACHING and TRAINING DVDs

Check out the BatAction Hitting Machine baseball pitching simulator. This high speed training machine is 100% Guaranteed to raise Batting Averages and has a full year warranty.

Nick Dixon is the President and founder of Nedco Sports, the "Hit2win Company". Dixon is also an active and full time high school baseball coach with over 25 years experience. Dixon is widely recognized as an expert in the area of baseball training, practice and skill development. Coach Dixon is better known as the inventor of several of baseball and softball's most popular training products such as the Original BatAction Hitting Machine, SKLZ Derek Jeter Hurricane Hitting Machine, Original Hitting Stick, Hit2win Trainer, SKLZ Target Trainer, SKLZ Derek Jeter ZipnHit Pro, and Strikeback Trainer. Dixon is also a contributing writer for BaseballCoachingDigest, the Baseball 2Day Coaches Journal, Batting Cage Builder, the American Baseball Directory and the Hit2win Baseball Coaches Monthly Newsletter. Dixon has 5 blogs related to baseball training including the BaseballCoachingDigest Blog, CoachesBest Training Blog, Hurricane Machine Training Blog, Batting Cage Buyers Blog, and the Bat Action Training Blog.

Article Source: http://EzineArticles.com/?expert=Nick_Dixon

Baseball Hitting Mechanics - Stride and Swing

By Kenny Buford

Stride

Each player has a preference about how big or small of a stride to take on the swing. Batters should do what is most comfortable for them, provided that they do not step on the line of the batter's box, as this will cause them to be called out.

When helping players determine how big of a stride to take, encourage them to experiment. A shorter stride is usually better than a longer one for control purposes, because it keeps the player over their body and does not allow things to get out of rhythm. As speed is a necessary part of batting, a short stride is desirable because it helps batters move to their next element, the swing, sooner.

As the batter is about to bring their hands forward to start the swinging motion, the striding leg should come forward toward the pitcher. The stride should be toward the area in front of home plate to help the batter get into better position.

Swing

During the swing, there are also small adjustments that players can make to ensure that they get the best swing possible. When working on hitting mechanics, even the smallest details count.

Throughout the swing, players should keep their back elbow up and close to the body. This allows the hands and the barrel of the bat to swing through completely. Finally, and perhaps most importantly when going through the swing, is to keep the head still. Keeping the head still ensures that you keep proper balance throughout the swing, which is otherwise hard to do because the batter is moving nearly every other part to connect with the ball.

Maintaining a still head also helps with creating a rhythm. If the batter's body has one still part that does not move or change during the swing, that batter will have a better idea of what part of their swing needs work or what part is not synchronized with the rest of the body. Whether in practice or in play, keeping a steady head is extremely important.

As the ball is pitched, batters should bring their hands to meet the ball. This mental picture will help players get the bat in contact with the ball in exactly the right place. At the same time that batters are bringing their hands to the ball, they should be keeping those hands level and still, so that the bat slices through the air on an even plane. A swing with any type of loop or wiggle can cause a dangerous pop-up, which can be detrimental to the team.

Run Drills

Just because a batter has been batting for years does not mean that they will maintain good form. In fact, more experience can lead to poor form because players become complacent and pay less attention to their form than when they were first learning it.

Every so often, at the discretion of the coach, players should go back and work on hitting basics. This means starting from a tee, using a whiffle ball. While some players may grumble about starting at such a fundamental level, you must show them the importance of being able to hit a whiffle ball off a tee, perfectly, every time. If players cannot hit a ball where they want it to go when it is sitting right in front of them, how are they going to be able to hit a ball moving toward them at 50 miles an hour or more?

When players hit a whiffle ball correctly from a tee, it acts like a knuckleball. When players hit is incorrectly, it spins uncontrollably and goes awry. Because of the air going through the ball, players will be able to see their mistakes easier and make adjustments as necessary.

After players become comfortable again with hitting from a tee, remove the tee and have them practice with regular pitches again. They will notice a difference in the way they hold themselves and approach the ball, and you will a difference in their effectiveness.

Kenny Buford is a baseball coach with over 20 years of experience and a founding member of Baseball Inner Circle. Discover the ultimate source for baseball drills, videos, and coaching tips that will immediately improve your players' skills and win more games for your team:
Baseball Inner Circle

Article Source: http://EzineArticles.com/?expert=Kenny_Buford

BaseballCoachingDigest.com